Solar thermal panels developed at EPFL are dressed up in
unique and patented new materials. Researchers created a stronger black coating
that retains its original color and thereby its absorption properties much
longer than traditional panels.
Like most elements of a building, the lifespan of a solar
thermal panel is between 25 and 30 years. To
slow the aging process and
maintain their performance, a team of researchers from EPFL have, in rapid
succession, improved the black coating used for thermal sensors and developed
an original and patented method for depositing the coating.
The color black is at the key element of thermal panels
because it can absorb up to 90% of the energy it receives. However, over time,
the effects of light and heat deteriorate the black, and the panel becomes less
efficient. Engineers have developed an innovative process that deposits thin
layers of 3 different materials that are more resistant, more selective and
less toxic than the chromium used thus far. As such this new material provides
high durability in the open air at temperatures of 300° C to 400° C, thus
avoiding the use of glass vacuum tubes, which are expensive.
A New Black Coating
Martin Joly, of the Laboratory of Solar Energy and Building
Physics, researched a novel process for the conversion of solar thermal energy.
He developed a nano crystalline coating which shows exceptional resistance to
high temperatures. It abandons the black chromium that was used for panels
currently on the market in favor of a multilayer composite of cobalt– for its
corrosion resistance, manganese– for black, and copper– for its thermal
conductivity.
"We wanted to develop selective layers that absorb
light well and that are less toxic than chromium. Thats why we followed the
trail of these materials." Layers deposited by a chemical process boast an
exceptional heat resistance that was never achieved with traditional chromium
coatings. In fact, they can withstand temperatures of 360 degrees Celcius
without deteriorating in contact with air.
For a flat sensor, the actual average temperature is about
80° C, and in summer the temperature can reach 200° C. Regularly exposed to air
and moisture, the sensor must last for 25 years on a building, which is not so
easy."The durability of our materials at temperatures exceeding 360° C
could also be of interest to thermal power plants," says Andreas Schüler,
who heads the research team.
From Nanoparticles to Full-Scale Prototypes
In order to cast the 3 different elements in thin and
homogeneous layers, the researchers did not hesitate to work in full scale:
"When researching nanoparticles, you normally use samples. For us, we set
the challenge to coat 2 meters long stainless steel tubes," explained the
researcher. To achieve this, the scientists had to build suitable machines for
their project.
Materials are deposited by successive dipping, and each
layer is heated by induction which evaporates the carbon and fixes the
elements. "We started by buying simple resistors then tried induction and
obtained results that far exceeded our expectations," said the researcher.
This method has the advantage of being rapid, with
impressive energy efficiency and an improved quality in the results. And the
layers are perfectly deposited and homogeneous. What's more, a patent has been
filed on this new method. The work conducted by Martin Joly has resulted in two
publications. One in Solar Energy, on the black chromium-free components and
their optical properties, won the best paper award from 2012–2013.
About EPFL
The École polytechnique fédérale de Lausanne (EPFL, English:
Swiss Federal Institute of Technology in Lausanne) is one of the two Swiss
Federal Institutes of Technology and is located in Lausanne, Switzerland. EPFL
is located in the French-speaking part of Switzerland; the sister institution
in the German-speaking part of Switzerland is theSwiss Federal Institute of
Technology in Zurich (ETH Zurich). Associated with several specialised research
institutes, the two universities form the Swiss Federal Institutes of
Technology Domain (ETH Domain), which is directly dependent on the Federal
Department of Home Affairs. In connection with research and teaching
activities, EPFL operates a nuclear reactor CROCUS, a Tokamak Fusion reactor, a
Blue Gene/Q Supercomputer and P3 bio-hazard facilities.
Source: EPFL
No comments:
Post a Comment
We will be glad to receive your comments as that is the way we can know where and what to improve on. Thanks as you comment.